Back to X-Rite Home

DensiEye 100

For extremely fast densitometric readings with an advanced user interface, the DensiEye is the ideal choice for the pressroom using process color printing.

Make An Appointment

+971 507 544 559 Sharjah, UAE

Contact Us

Fast, Automated, Affordable Pressroom Densitometer

The DensiEye 100 is very easy to use, making it perfectly suited to anyone with only a basic knowledge of print quality control. Users have direct visual access to the most commonly used functions and density readings without even pressing a key. The clear Pass/Fail Indicator (PFI) provides quick results and lets users move on to the next measurement without even needing to look at the display unless the PFI alarm flashes.

DensiEye 100 is equipped with LED technology for low power consumption and is capable of up to 500,000 measurements per battery set (DensiEye uses standard AA batteries). This means less maintenance and fewer battery replacements. DensiEye 100 can easily communicate with any PC through the USB port.


  •  Fast, easy density measurements with a short learning curve, suitable for use by both skilled and unskilled pressroom workers.
  •  Enables a wide range of measurement functions, including differences for density and gray balance and automatic recognition of color, patch type and paper white base.
  •  Pass/Fail indicator for ease of use.
  •  Measurement aperture of 1.6 or 3 mm.
  •  Fast measurement time and excellent inter-instrument agreement.


DensiEye 100 can easily be upgraded to a fully-featured DensiEye 700 to include all the necessary functions for highly detailed measurements. An optional smaller aperture (which can include a polarization filter) is also available for measuring small strips as required in magazine and newspaper printing environments.

Aperture 1.6 mm or 3 mm
Battery 2 Alkaline 1.5V size AA
Battery Life 500’000
Communication Interface USB
Density Range 0.0 D – 3.0 D
Density Standards Status E or T
Dimensions (length, width, height)
17.5 cm x 7.5 cm x 5.0 cm
7″ x 3″ x 2″
Humidity 20% to 80% non condensing
Industry Standards  ISO 5-3
Instrument Display 160 x 80 Pixels, 4 gray scales
Inter-Instrument Agreement ± 0,02 D or ± 2%
Languages Supported Chinese, Czech, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Latvian, Polish, Portuguese, Romanian, Russian, Slovenian, Spanish
Light Source 3 LED (RGB)
Linearity ± 0,01 D or ± 1%
Measurement Conditions M0 or M3
Measurement Geometry 45°/0°
Measurement Time 0.5 sec
Operating Temperature Range
10°C to 40°C
50°F to 104°F
Pass / Fail Yes
Short Term Repeatability – Density
0,00 D – 2,50 D: ± 0,01 D or ± 1% max.
2,50 D – 3,00 D: ± 0,03 D or ± 3% max.
Storage Temperature Range
‘-20°C to 70°C
– 4°F to 158°F
Warm Up Time None
Warranty 1 year
400 g
0.88 lbs.
What’s Included? calibration card, USB cable, quick start guide, device certificate, CD with operating instructions and software, device case
Looking for support? Visit this product’s support page for comprehensive support information.