MANUFACTURER OF STANDARDISED COLOUR VIEWING SOLUTIONS
Color matching devices for accurate comparisons of colored surfaces and materials with standard daylight D50 and D65 according to ISO standard.
JUST daylight 5000 proGraphic
The D50 fluorescent lamps, developed specifically for prepress and press applications, comply with the latest ISO 3664:2009 standard with higher UV component. Be it as replacement lamps or for conversion to the latest ISO standard, JUST daylight 5000 proGraphic lamps are suitable for all JUST standardised viewing devices. Make reliable colour decisions under a daylight lamp with constant spectral properties and top-class colour quality.
DLS proofStation
Perfect lighting technology and functional design. No operating hours meter and no expensive replacement lamps. Now you can match colours withour worrying for years. The continuously high light quality of the LEDs far exceeds the minimum requirements according to ISO 3664:2009. The mix of multiple coloured LEDs generates an even more harmonious and complete light spectrum than that of conventional fluorescent lamps. Dimmable proofStations with a practical pull-out keyboard and monitor rail are available for soft proofing applications.
DLS color proofStation
The classic color matching station with convenient cabinet is now available with the new JUST DLS moduLight color proofing light. With the push of a button you can switch between D50 and D65 and UV content can be enabled or disabled for either illuminant. Especially during the transition time for converting from FOGRA39 to FOGRA51/52, the solution provided by the new LED luminaire is a practical one.
DLS Virtual proofStation
The DLS Virtual proofStations have all you need for the modern soft proof workflow. From dimmable and switchable D50/D65 LED luminaire, monitor rails, all the way to a pull-out keyboard and a USB interface – they come with everything for reliable colour matching from prepress to press. In addition to the regular colour matching station, the Virtual proofStations are also available as desktop solutions and side-by-side versions. The latter permit parallel viewing of multiple or large printed sheets. Choose the station that suits your needs.
Challenge 5000
The low-cost color proofing unit for 3B and 6B formats is optimally suited to use in advertising agencies and prepress applications. The asymmetrical colour proof light guarantees low-glare, low-reflection illumination on the desk and the rear wall, complying with the new ISO 3664:2009.
colorFrame
Simple, but a stroke of genius! The mobile „notebook design“ of the colorFrame lets you collapse it in an instant and take it with you wherever you go – be it just between offices or on a colour-matching visit to a customer. Modern styling in combination with outstanding illumination and optional dimming for soft proofing – that makes the colorFrame the all-rounder for advertising agencies, photographers and prepress businesses.
colorMaster
The colorMaster permits desktop viewing of large, reflective copy, in particular. Its mobile „notebook design“ lets you collapse it in an instant and take it with you wherever you go – be it just between offices or on a colour-matching visit to a customer. Outstanding illumination over the entire area and optional dimming for soft proofing – that makes the colorMaster the big all-rounder for advertising agencies, photographers and prepress businesses.
DLS colorCommunicator
LED desktop viewing device for visual color control, latest JUST LED technology.
- Extremely homogeneous as well as glare- and reflection-free illumination, thanks to hollow profile and Fresnel-type prismatic lens
- 2 LED modules for uniform illumination of the proof
- D50/D65 switchable, according to ISO 3664 and ISO 3668
- UV on/off
- UV-ONLY: UV-A for the detection of optical brighteners
- dimmable without color shift
DLS moduLight
No operating hours meter, no expensive replacement lamps, and no more red warning lamps. Now you can match colours withour worrying for years. The LED luminaire combines the high illuminance level of diodes with special Fresnel lenses for optimum homogeneity in illumination and minor reflection behavior. The continuously high light quality of the LEDs far exceeds the minimum requirements according to ISO 3664:2009 and ISO 3668. The mix of multiple coloured LEDs generates an even more harmonious and complete light spectrum than that of conventional fluorescent lamps.
Color Control Professional 5000
The Color Control Professional 5000 devices are optimally suitable as an entry-level solution for occasional colour matching jobs. The asymmetrical light design makes for low-reflection viewing conditions without interfering reflections on the viewing surface. Therefore, colour matching should be done by a slanted workface. The D50 colour proofing light complies with the current ISO standard and is equipped with an operation hours meter, which indicates the next relamping.
DLS Wall Illuminator
The DLS Wall Illuminator starts where other sample stations end. Due to its size and accessibility, it is ideally suited for the colour evaluation of large format prints. Whether trade fair banners or advertising posters – standard-compliant illumination is guaranteed over the entire rear wall.
DLS Wall Illuminator
DLS Wall Illumination is the professional solution for large-area wall illumination with standardised light D50 and D65. For visual colour assessment, simply fix posters, plots or large-format prints on the magnetic rear wall. Thanks to the flexible modular concept of the LED luminaire the color viewing area is customisable to your needs and applications. Just ask us – we are more than willing to help.
Smart Light 5000
Our low-cost Smart Light transparency viewers with five illumination formats can be used for a wide variety of applications. Smart Light transparency viewers are optimally suitable for everything from classical transparency viewing and repro work, all the way to industrial use for quality control purposes. Choose the transparency viewer that suits your requirements best from a range of five sizes.
Classic Line
The Classic Line transparency viewers are ideal for classical transparency reproduction. Thanks to the possibility of continuously variable dimming, and their homogeneous illumination at any brightness level, these transparency viewers are, of course, also the perfect choice for industrial quality control of translucent materials of all kinds. Choose the transparency viewer that suits your requirements best from a range of seven sizes.
Litho Light Table
Be it for classical montage and retouching work, or for quality control on transparent copy – the light tables from JUST will definitely meet your requirements. The scratch-resistant glass surface and the additional acrylic-glass prismatic lens guarantee homogeneous illumination with an illuminance of 3500 lux. The silver-anodized and brushed aluminum housing is as stable as it is stylish. To work ergonomically, simply set the litho light table to the required height.
Transparency Light Table
These light tables permit not only classical transparency and film viewing, but also quality control of translucent copy under a D50 standard illuminant. The colour-neutral, anti-reflective surface and special reflectors ensure homogeneous illumination with high luminous efficiency. All standardised light tables are continuously dimmable between 500 and 5000 lux. To work ergonomically, simply set the standardised light table to the required height.